BM9010 Analogue or PC Test Line

BM9010 Analogue or PC Test Line

BM9010 Analogue or PC Test Line Features

The core equipment of the BM9010 test line is the BM9010 A or B brake tester. You can select one or more of the following equipment designing a customised BM9010 test line:

• BM40010 suspension tester
• BM810 side slip tester
• BM305 tacho tester tester

All equipment will be controlled from one embedded electronics, the X010 system.

BM9010 Analogue or PC Test Line Advantages and features

The BM9010 test line is a strong and reliable test line. The brake tester can test axles up to 3,500 kg, the suspension tester can test axles up to 3,000 kg, the tacho tester can test axles up to 3,000 kg and the side slip tester can test wheel weights up to 1,000 kg.

The BM9010 test line can be installed in-ground and is supplied with hot galvanised subframes for all selected equipment. These subframes are concreted into the floor prior to installation the equipment. The subframes ensure an easy planning and implementation of installation.

The test line is as standard supplied with a display having two large analogue readings of brake force left and right and 50 mm high bright digital readout of brake force imbalance.

When configured with suspension tester and side slip, then these gauges and the digital imbalance window is used to display the test result from this equipment.

Optionally the BM9010 test line can be supplied with special Windows based BM display, which additional has 50 mm high bright digital readout of ovality, pedal force, weight, efficiency, suspension values, speed and distance values.

The display for a BM9010 test line can be installed on the wall saving floor space or on floor column device.

The test line can be supplied in a minimum configuration and still allows for later upgrade to all options. This means that in case customer later wants to upgrade to a higher specification due to new legislation or other, then customer will not experience, that he has to purchase another test line.

As standard the test line software allows for advanced graphical printout enabling the customer to perform both pre-inspection and diagnosing before repair brake tests. This advanced printout of test results can be done without having to connect a PC to the brake tester.

The BM9010 test line can be configured to run BM Windows Software programs installed on a PC. This PC can replace the analogue display or it can be an “add-on” installed in the workshop office. The Windows program allows for advanced storing and presentation of test results using SQL database technology.

The test line can be configured into a complete vehicle inspection line by adding the BM FlexCheck vehicle inspection IT system.

Applications

The BM9010 test line is designed for private workshops and vehicle inspection bodies.